Short answer: Most stainless steel fasteners are 304 (A2) or 316 (A4). Choose 304 for general indoor and food-area use, and 316 where salt, chlorides or chemicals are present. Then lock down the property class, finish, thread standard and traceability. Stainless threads gall, so plan lubrication and torque from the start.
A pallet of M10 bolts leaves the factory with a stainless steel label. Six weeks later, the bolts begin showing rust spots on a rooftop unit near the coast. The label and drawing both said stainless, but there was no mention of the grade. To help avoid this, we've put together a guide covering the grade, class, finish and sourcing checks we use when handling fastener sourcing for overseas buyers.
You'll learn why stainless steel resists corrosion, which grades are used for fasteners and when to choose 304 or 316. We'll also look at what property classes mean, which finishes to use, how to avoid galling and what to check when sourcing parts. The guide includes a grade table, drawing checklist, quote table and six FAQs.
What are stainless steel fasteners?
Stainless steel fasteners are bolts, screws, studs, nuts and washers made from steels with enough chromium to form a thin, self-healing oxide film on the surface. That film resists rust. If it is scratched or contaminated, it needs oxygen and clean metal to re-form, which is why handling, cleaning and finishing matter.
ISO 3506-1 is the international standard for the mechanical and physical properties of corrosion-resistant stainless bolts, screws and studs. It covers coarse and fine pitch threads and sets property classes for austenitic, martensitic, ferritic and duplex grades (ISO). Most drawings cite it by name or through an equivalent ASTM or DIN standard.
Which grades are used for stainless steel fasteners?
The ISO 3506 system labels the common austenitic grades A1, A2 and A4. An Australian stainless steel association lists A1 as grade 303, A2 as grade 304 and A4 as grade 316, and notes that head markings often show the class. It also names martensitic 410 (C1) as a less common option (ASSDA).
The first three rows follow the ASSDA source above. The remaining details are general industry practice, so confirm them against your application. Wootz.work keeps material expertise across its network for this reason.
304 vs 316 stainless steel fasteners: which do you need?
The right stainless steel grade depends on the conditions it will face. 304 stainless steel fasteners are a good fit for dry indoor spaces with little risk of corrosion. If the fasteners will be exposed to coastal conditions, de-icing salts or chemicals, 316 stainless steel fasteners are usually the better option because the added molybdenum helps protect against chlorides.
These are starting points from common industry practice, not a guarantee for your site. If the environment is uncertain, test a sample under real conditions, or ask the shop to review the application.
What do property classes and head markings mean?
Grade says what the steel is. Property class says how strong the fastener is. Under ISO 3506, class 50 has a minimum tensile strength of 500 MPa, and unmarked fasteners should be treated as class 50. Class 70 is the most common and has a minimum of 700 MPa. Classes 80 and 100 exist, often in 316, according to the same ASSDA source.
If you need high strength stainless steel fasteners, specify the class on the drawing, not only the grade. A bolt marked A4-70 is 316 at class 70. Ask the shop how it reaches any higher class, and ask for test results.
Which finishes do stainless steel fasteners need?
Most stainless fasteners need no coating for corrosion. They need clean surfaces. Two finishes matter most, and a few more apply to special needs.
The finishes list reflects general shop practice. Wootz.work's fastener page lists PTFE and black oxide among its available coatings, alongside zinc, zinc flake, hot-dip galvanizing, nickel and chrome, but it does not tie them to stainless or mention passivation. Ask your shop to state the passivation method and the acceptance test on the drawing or purchase order.
How do you stop stainless fasteners from galling?
Galling is cold welding between mating threads. The oxide film breaks down, metal transfers and the parts seize. It hits stainless nuts and bolts most under high torque, and dirt in the threads makes it worse.
- Use rolled threads, which resist galling better than machined threads.
- Tighten with a torque wrench to the correct value, since too much torque promotes galling.
- Lubricate the threads before putting the parts together. Molybdenum disulfide and nickel powder are common ingredients in these lubricants.
- Keep the threads free from dirt and take care not to damage them during handling.
- If the design allows, use mating surfaces with a hardness difference close to 50 HB.
One common belief is a myth: pairing 316 studs with 304 nuts, or the reverse, does not avoid galling. Put the lubricant requirement and the torque value on the assembly drawing. A design for manufacturability review can also flag thread fits and lengths that invite seizing before parts ship.
Can you use stainless steel fasteners with aluminum or carbon steel?
Yes, in many cases, but some care is needed. If two different metals are in contact and the joint gets wet, the less noble metal can corrode faster. Stainless steel is generally the more noble of the two, so aluminum or carbon steel in contact with the fastener may be affected.
Where possible, separate the metals at the joint using nylon or coated washers, sleeves, sealant, or a coating on the softer metal. Keep the area dry and make sure water can drain away. If you're using stainless steel fasteners with aluminum in marine or washdown conditions, have your shop or engineer review the combination. This is general advice based on galvanic corrosion practices, so check what works for your specific materials and conditions.
What should a drawing or purchase order say?
A fastener order that says only "stainless steel" invites substitution. Put each item below on the drawing or purchase order.
If you are buying standard catalog parts, name the standard and grade. If you need a special head, thread or length, send a drawing, and the shop will confirm whether tooling exists or must be made.
How do you source stainless steel fasteners?
You have three common routes. Each fits a different order.
Price shouldn't be the first thing you look at when searching for stainless steel fasteners manufacturers. Start by asking which grades and classes they make themselves, which processes they send outside and what proof comes with each lot. Buying offshore isn't always practical, especially for orders needed within a few days, small one-off purchases or projects with domestic-content rules. Tariff rates can also change, so check the latest duties for your product classification with a customs broker before finalising the price.
How do you verify what arrives?
A label or magnet test alone won't tell you which stainless steel grade you're dealing with. Austenitic stainless steel generally isn't magnetic, although cold forming can cause a slight attraction. The best way to check the grade is to request documentation linked to the material lot.
- A material certificate that shows chemical analysis and heat lot number.
- A certificate of conformance that names the standard, grade and class.
- Mechanical test results for the property class.
- Dimensional inspection against the drawing.
- Positive material identification on incoming samples, if the application is critical.
- Lot labels that match the paperwork.
Wootz.work's published fastener page mentions certificates of conformance and heat lot numbers traceable to mill certifications, plus dimensional, mechanical and metallographic testing and NDT coordinated with third-party labs. The inspection and traceability records stay linked to each order.
How do you compare stainless fastener quotes?
A low unit price doesn't tell you much unless you know what's included. Two suppliers might quote the same bolt but leave out different parts of the process. To compare them properly, make a sheet with each cost item in a separate row and each supplier in a separate column.
Share the same drawing, quantity and delivery terms with each supplier so you can compare the landed cost per thousand pieces fairly. Wootz.work provides quotes for DAP or DDP delivery, along with customized export packaging. This helps you see the landed cost before placing an order. Check what the quote excludes first, and if nothing is mentioned, ask the supplier to confirm the exclusions in writing.
What changes when one partner manages the factories?
Wootz.work is a manufacturing partner, not a factory owner. It runs a network of 400+ qualified manufacturers across India and Southeast Asia. Its fastener page lists metric sizes from M2 to M100 and imperial sizes from #0 to 4 inches, ISO metric product standards with DIN available on request, and ASTM A193 and A194 stud bolts in B8 (SS304) and B8M (SS316). Minimum order quantity varies by product type and material.
Wootz.work holds ISO 9001:2015, ISO 14001:2015 and ISO 45001:2018, and parts are manufactured to the standards your drawing names. Quotes return in 24 to 48 hours and double as a design review. Quality check-ins log each drawing requirement at every stage, so non-conformances surface before dispatch. The network has delivered 60M+ parts and assemblies at a 98%+ on-time delivery rate. The way Wootz.work protects your drawings and end customer identity is simple: client names stay with Wootz.work, so factory partners do not see who your end customer is.
If you’re unsure about the finish or fit, you can order a free sample box. This setup works well for repeat orders, especially when buyers want the cost benefits of offshore sourcing without dealing with multiple shops. However, it’s not the best option for urgent, one-time orders.
Which red flags should end the conversation?
- The quote says "stainless" with no grade or class.
- No mill certificate or heat lot number is available.
- Head markings and paperwork do not match.
- Nobody can state the passivation method.
- Subcontracted steps stay unnamed.
- The quote has no exclusions, validity period or delivery term.
- Samples ship without a test report.
- Audits meet resistance, whether on site or remote.
Two or more of these is reason enough to drop a supplier from the shortlist.
What should you verify before the first production order?
- Order a sample lot with mill certificates, a certificate of conformance and a dimensional report.
- Test the sample in your joint, including torque and a galling check on mating threads.
- Carry out a positive material identification (PMI) test on a few pieces.
- Arrange a factory audit. If visiting isn't possible, a live video tour of the plant or an independent inspector can do the job.
- Speak with two customer references from the past year.
- Include the grade, class, finish, certificates and acceptance tests in the purchase order.
- Confirm the delivery terms and when the risk passes from the supplier to you.
- Decide in advance how nonconforming lots will be handled, whether through replacement, rework or credit.
Next step: specify the grade before you request quotes
Good stainless steel fasteners start with a complete specification: grade, class, finish, certificates and tests. Use the tables above to build your request, send it to three to five suppliers and compare landed cost per thousand. If you want an engineering-led partner that manages factories across India and Southeast Asia, Send us your drawing. Your first quote comes with a free DFM review.